AIRcable Serial3

The Serial3 is an intelligent serial-to-Bluetooth interface, which eliminates the need for Bluetooth software on the PC and much more...

Features:

• Allows full customisation
• Control of master and slave connections
• Restrict connectivity to customer devices
• Security functions
• Command line interface in BASIC
• Runs applications in BASIC on the AIRcable OS.

Pre-configured and ready for action!

The AIRcable Serial3 is our next-generation serial module, designed for optimizing serial-to-Bluetooth connections. It is much more than just a connection module.

The pre-installed cable replacement application allows zero-configuration use as "service-slave", allowing incoming serial connections from other Bluetooth devices. With the push of a button it configures in a secure one-to-one slave or master mode.

Fully programmable and configurable!

The AIRcable Serial3 is programmed in BASIC, allowing you to adapt it to your particular application and needs.

The AIRcable Serial3 runs the latest AIRcable OS Operating System that allows complete customization including automatic and selective connections, configuration of PIN code, authentication, name, terminal lines etc. (See programming manual for more information).

The AIRcable Serial3 has external baud rate switches for 4800 - 115200 baud and a hardware handshake disable switch so it can be used in 3-wire serial connection applications.

It has a male-type DB9 connector, which can be adapted to a female-type connector with the included null-modem adapter.

The module can be set into 5 different modes, allowing it to be independent. The "service-slave" mode allows it to work as an AIRcable Bluetooth Service module.

Powering the AIRcable Serial3

The AIRcable module requires external power (min 5V, max 15V) but can also be powered through pin 9 of the DB9 connector (DC 5-15V). 

Our new AIRcable Serial OS product has a rechargeable lithium polymere battery build-in and a range of 500 ft with our specifically optimised 4-inch antenna.

110-240v power supply

This power supply can only be used with AIRcable Serial devices. Order this if you need an external power supply and cannot provide power to the AIRcable Serial modules through pin 9 of the DB9 connector. .