|
AIRcable Serial3X
The Serial3X is designed for optimizing serial-to-Bluetooth connections. It is much more than just a connection module.
Features:
- Complete customisation available
- Rechargeable Lithium-polymer battery
- External antenna for longer range of 500ft.
Complete customisation with the onboard programmable OS
The AIRcable Serial3X is programmed in BASIC so you can adapt it to your particular application and needs.
The already installed BASIC application allows zero-configuration use as "service-slave", allowing incoming serial connections from other Bluetooth devices. And it is easily configurable into a secure one-to-one slave or master mode.
The Serial3X runs the latest AIRcable OS Operating System, which allows complete customisation including automatic and selective connections, configuration of PIN code, authentication, name, terminal lines etc. (See programming manual for more information).
Versatile hardware and onboard battery
The AIRcable Serial3X has a male-type DB9 connector, which can be adapted to a female-type connector with our null-modem adapter.
It has external baud rate switches for 4800 - 115200 baud and a hardware handshake disable switch so it can be used in 3-wire serial connection applications.
The Serial3X also has an onboard rechargeable Lithium-polymer battery with built-in charger. The AIRcable Serial3X can be recharged from the external power plug (1.3mm) or through pin 9 with an extended range of 4.5-15V.
External antenna
Using the included 1-inch stubby external antenna, the range can be extended to 40m (100ft).
Data Sheet
|