|
Nemo 10 Embedded Ethernet Module
** Our lowest cost serial-to-ethernet conversion module**
The Nemo 10 is a low-cost embedded device server module with serial port for building into products that require a network interface.
This is an embedded serial-to-ethernet converter or adapter in 24-pin DIL format, 45mm x 45mm with built in UART serial port, configured via Telnet or serial port. It supports a range of protocols and TCP/IP stack. A user-friendly serial-to-ethernet converter module for adding embedded ethernet to your application.
Features
- Single-chip DIL-type ethernet-to-serial or serial-to-ethernet converter module for embedded ethernet
- Compact size: 45mm x 45mm x 18.5mm
- Built-in UART for serial interface
- Data transfer rate up to 115Kbps
- Supports 10Base-T ethernet interface
- Supports ARP, IP/ICMP, TCP, Telnet, DHCP and PPPoE
- Reliable TCP/IP protocol stack
- PPPoE protocol for DSL connection to broadband network
- Configuration using Telnet or Config command via serial interface
- Management software for configuration and administration
- +5v Input, 0.3w low power consumption.
Panel Layout
Data Sheet (pdf)
User Manual (pdf)
Management Software
|
